Customer Project

How to Turn Lamps Into Side Tables

Browse Projects

  • Fireplace Festivities
  • Coastal Cabinet
After
  • Estimated Project Time:

    3 Hours

  • Challenge Level:

    Intermediate

  • Tools & Supplies:

    • 2 Lamps
    • Tape Measure
    • Pencil
    • 2 Wooden Tabletops
    • Drill
    • Permanent Marker
    • Hack Saw
    • 220 Grit Sandpaper
    • (2) 1/2" nipple caps
    • Rags or Tack Cloth

  1. Select two old lamps with great architectural shape to them. Note: Repeat the following steps for each lamp side table.
  2. Remove all lighting parts except for the main threaded rod (nipple) that runs through the center of the lamp base.
  3. Measure the width of the rod (the featured rod was 1.3cm).
  4. Measure and mark the center of the new wood tabletop.
  5. Drill a hole at the center mark the diameter of the lamp rod.
  6. Slide the tabletop over the nipple.
  7. Mark the nipple .635cm above the tabletop.
  8. Remove the tabletop and cut the nipple on the mark using a hack saw.
  9. Put the tabletop over the cut nipple and secure it to the lamp base by tightening a 1.3cm nipple cap. After securing nipple cap, be sure the tabletop is tight and securely attached to the lamp base.
  10. Lightly sand the tabletop and remove the dust with a damp rag or tack cloth.
  11. Spray-paint the entire table according to the manufacturer's instructions. Let dry completely. 

Customer Reviews

Be the first customer to

This content comes from a hidden element on this page.

The inline option preserves bound JavaScript events and changes, and it puts the content back where it came from when it is closed.

Click me, it will be preserved!

If you try to open a new Colorbox while it is already open, it will update itself with the new content.

Updating Content Example:
Click here to load new content